pattern metal
英 [ˈpætn ˈmetl]
美 [ˈpætərn ˈmetl]
网络 模型用金属; 制模金属; 模型用金屬
双语例句
- During forging forming process, temperature affects the pattern of metal deformation considerably, especially in the forming process at high temperature.
锻件成形过程中，非稳态、不均匀的温度场对金属的塑性流动有很大的影响，尤其是高温成形过程。 - The pattern metal layer is arranged on the insulation layer and filled into the diversion holes, thereby being an inner linking layer of the multi-chip packaging structure of the utility model.
图案化金属层位于绝缘层上并填入于导通孔中，以作为本实用新型多芯片封装结构的内连线层。 - They tried to get a foot in the door. embossed pattern on metal
他们试图加入进来。在金属上加浮雕图案 - The utility model discloses a multi-chip packaging structure comprising at least a loader, at least a packaging module, an insulation layer and a pattern metal layer.
本实用新型公开一种多芯片封装结构，至少包括一承载器、至少一封装模块、一绝缘层及一图案化金属层。 - Embossed pattern on metal
在金属上加浮雕图案 - The paper shows successful application of the fuzzy mathematics to the pattern recognition of the metal cutting states.
通过试算，证明这种方法的运用是可行的。 - This paper analysed the pattern and composition of residual metal in diamond fracture surface by ways of Scanning Electron Microscope ( SEM) and Energy Dispersion Spectrum ( EDS).
采用扫描电镜（SEM）和能谱（EDS）分析方法，分析了国内六种代表性的金刚石断面上残留触媒的形态及成分。 - The Microcup pattern with insulating material was made on metal substrate and the mould was obtained with follow-up process.
即通过在金属基材上形成选择性的导电与不导电图形，来制作深纹的“微杯”金属模具。 - Therefore, the growth pattern of metal doped silicon clusters depends on the kind of doped metal.
因此，掺杂金属的种类决定金属掺杂硅团簇的增长模式。 - Second, laser drilling after pattern formation. third. filling metal paste.
形成图形以后激光钻孔：（3）填充金属胶； - Objective: To evaluate the influence of different wax pattern materials on the marginal adaptation of the wax pattern of metal crown.
目的：研究不同种类的熔模材料对铸造冠蜡型边缘适合性的影响。 - An analysis of the pattern of longitudinal slot antenna on the metal cylinder covered with a high collision plasma layer
高碰撞等离子体覆盖金属圆柱纵槽天线方向图分析 - Fabrication of pattern metal layer on diamond surfaces
金刚石薄膜表面图形化金属层的制备 - An investigation on complex deforming pattern of round metal sheet in press-forming process
带孔环形薄板复合成形规律的研究 - Manufacturing of the Metallization Pattern on Al Metal Substrate for Package
封装用铝金属基板表面金属化图形的制作 - Inversion investigation through energy principle is applied to assess reaction extent to combustible components in FAE, and reaction pattern of metal component in FAE. A new approach is supplied for FAE design.
用能量方法反演研究FAE燃料中可燃元素组元的完全反应程度，以及FAE燃料中金属燃料组元可能的反应模式，为FAE燃料设计提供新的研究方法。 - Based on the experimental study, the co-authors discuss preliminarily the feasibility of the process for rolling small diameter metal pipes with Y type 3-roll continuous cold rolling mill, analyze the deformation pattern of metal pipes in the applicable passes and present the rolling simulation for pipe O.
在实验研究的基础上，初步探讨了Y型三辊冷连轧小直径金属管工艺的可行性，分析了在合适的孔型系统中金属管的变形规律，给出了钢管减径的轧制模型。 - According to the change pattern of some parameters in metal cutting processes, this paper proposes for the first time a new time series analysis model-Autoregressive Constant Model ARC ( 2).
本文根据切削过程中一些参数的变化规律，从理论上首次提出了一种新的时间序列分析模型，即常系数固定价ARC（2）模型。 - The possibly coordination pattern of complexes containing metal chain supported by those ligands was discussed.
在此基础上，探讨了新型多齿配体用于合成线性金属链配合物的可能配位模式。 - Control Pattern of Current Waveform on Droplet Short-Circuiting Transfer in Carbon Dioxide Arc Welding Pattern recognition of spectrum information of metal transfer
二氧化碳短路过渡焊电流波形控制模式的研究焊接电弧光谱信息模式识别软件的开发 - Numerical Simulation of the Effect of Properties of the Polystyrene Pattern on the Metal Flow Velocity and the Gaseous Pressure of the Gap
消失模样性能对铝合金液充型速度及间隙压力影响的数值计算 - The results show that due to low heat capacity, the temperature of the liquid magnesium alloys drop rapidly during filling process. The key factor to improve the quality of castings is to ensure the proper filling pattern and temperature of the liquid metal high enough.
模拟结果表明，镁合金压铸件因含热量少，充型流动过程温度下降较快，消除铸件表面缺陷，提高铸件质量的关键是保证金属液流动时良好的流动形态和足够高的温度。 - With electroless Ni plating on microcircuit of metallized ceramics as an example, the electroless N platig on insulators printed with complex pattern of metal film is discussed in detail.
本文以陶瓷体金属化徽型线路上的化学镀镍为例，论述了在绝缘材料上印有复杂金属膜图案的化学镀镍问题。 - The effects of superconducting SMFs up to 7-tesla on antioxidation system of wheat seedling ( SOD, CAT activity and MDA content) and the expression pattern of SOD isoenzyme with different metal prosthetic groups were investigated.
研究了7T超导稳态强磁场在不同处理时间条件下对小麦幼苗的抗氧化系统（SOD、CAT活性和MDA含量）的影响，并对不同金属辅基SOD酶的诱导表达模式进行了探讨。 - Experimental study on the distribution pattern of heavy metal elements in fly ash from burnt coal
燃煤飞灰中重金属元素分布规律的试验研究 - Control of Thermally Induced Pattern Formation in Bilayer Metal/ Polymer Films
热诱导金属/聚合物膜系图案化控制的研究 - Characteristics and metallogenic pattern of rare metal, rare-earth metal and precious metal deposit
湖南省稀有稀土贵金属矿床特征与成矿规律 - Pattern recognition of spectrum information of metal transfer
焊接电弧光谱信息模式识别软件的开发 - Owing to eliminating the diffusion, the pattern of metal is more regular and longer.
因为消除了液液之间的扩散，所以金属的图案更为均一，长度更长。 - The pattern recognition and classification of metal fracture surface images is one of the important contents in automatic diagnosis of fracture components.
金属断口模式识别与分类是断裂构件智能化诊断的重要内容。